Home/Multi Crop Thresher
Landforce Multi Crop Thresher is mainly used for shelling wheat, sorghum , Mustard, soyabean, millets etc.
FIND DEALER NEAR YOULandforce Multi Crop Thresher is mainly used for shelling wheat, sorghum , Mustard, soyabean, millets etc. and to suit medium & large holding farmers and custom hiring. It is efficient and can thresh wheat throughly and produce high quality straw . Dasmesh Multi Crop Thresher has the features of com
Landforce Multi Crop Thresher is mainly used for shelling wheat, sorghum , Mustard, soyabean, millets etc. and to suit medium & large holding farmers and custom hiring. It is efficient and can thresh wheat throughly and produce high quality straw .
Show MoreHopper was fabricated by using mild matel plate. Main function of the hopper is to control the feed rate without choking of machine. A hopper plate is provided with to control the passage of material from the hopper.
Show MoreMulticrope thresher come with 1 blower and one forward blower for 100 % cleaning of crops.
Show MoreA very strong frame is provided in the thresher on which all the functional parts are attached. The frame is made usually of heavy angle iron sections. It should be strong enough to sustain vibrations of machine, during its operation in the field.
Show MoreThresher is provided with wheels at its legs, so that transportation can be done easily. These wheels are made mostly with cost iron but new and large capacity threshers are equipped with pneumatic wheels for better performance during transportation.
Show MoreThe straw in the threshing unit gets into the blower then the blower blows out the straw.
Show MoreBelt and pulley mechanism is used to transmit the power from the PTO to the shaft of the flywheel.
Show More
MODEL |
THM |
THRESHING DRUM |
|
DIAMETER |
915 MM |
LENGTH |
710 MM |
NO. OF CUTTING BLADES |
THREE |
SHEET THICKNESS (CURVED PART) |
3.5 MM |
SHEET THICKNESS (SIDE WALLS) |
3 MM |
LOAD WHEEL |
150 KG. |
SPEED OF SUCTION BLOWERS |
VARIABLE (700-900 RPM) |
NO. OF CLEANING BLOWER |
ONE (WITH AIR FLOW ADJUSTMENT) |
CROP FEEDING MODE |
|
MAIN SHAFT DIAMETER |
75 MM |
NO. OF TRANSMISSION JOINTS |
FOUR |
REQUIRED H.P. |
35 HP AND ABOVE |
OVERALL DIMENSIONS |
|
LENGTH |
4950 MM |
WIDTH |
1780 MM |
HEIGHT |
2050 MM |
WEIGHT (APPROX.) |
1440 KG. |
*Company reserves the rights to change/amend products specifications without any prior notice.